ABSTRACT
Speech could be used, because it was a neuromuscular movement without teeth contact. The method was stable, however it was used more in vertical relation deciding. More study was needed in the horizontal relation deciding. This article was to explain why and how to use phonetic method to decide jaws relation, through literature review.
Subject(s)
Denture Design , Denture, Complete , Jaw , PhoneticsABSTRACT
OBJECTIVE@#To investigate the blood pressure and heart rate changes and influencing factors during single dental implant surgery.@*METHODS@#A retrospective cohort study was conducted. Six hundred and forty cases underwent single dental implant placement in Department of Prosthodontics, Peking University School and Hospital of Stomatology from January 2016 to December 2016 were recruited in this study according to the inclusion and exclusion criteria. They were divided into different groups according to the exposure factors which were patient characteristics (gender, age) and surgical procedures (immediate placement, flap elevation, bone grafting). The correlation between blood pressure and heart rate variability during single dental implant surgery and the patient characteristics and surgical procedures were analyzed.@*RESULTS@#The average systolic blood pressure variability was 9.47%±6.45% (maximum 46.04%), the average diastolic blood pressure variability was 12.18%±9.39% (maximum 88.00%), and the average heart rate variability was 10.59%±7.68% (maximum 49.12%). The effects of age and bone grafting on blood pressure variability, and of gender and immediate placement on heart rate variability, were statistically significant (P < 0.05), respectively. The incidence of abnormal intraoperative blood pressure rise was 4.69%, of which there were 4 cases (0.63%) of systolic blood pressure ≥180 mmHg and/or diastolic blood pressure ≥110 mmHg. The incidence of abnormal intraoperative heart rate rise was 6.72%. Hierarchical analysis showed a higher risk of abnormal intraoperative blood pressure rise in the elderly (≥60 years) male patients [P < 0.05, RR=3.409 (95%CI: 1.155-10.062) ] and flap elevation with bone grafting cases [P < 0.05, RR=2.382 (95%CI: 1.126-5.040)], respectively. There was no statistically significant association between abnormal heart rate rise and patient characteristics or surgical procedures (P>0.05).@*CONCLUSION@#There was a certain risk of blood pressure and heart rate variability during dental implant surgery. Elderly male patients and flap elevation with bone grafting were risk factors of abnormal intraoperative blood pressure rise.
Subject(s)
Aged , Humans , Male , Blood Pressure , Dental Implantation, Endosseous , Dental Implants , Heart Rate , Maxilla/surgery , Retrospective Studies , Treatment OutcomeABSTRACT
OBJECTIVE@#To analyze the relationship between the width of the maxillary anterior teeth and the anterior arch perimeter, to analyze the change rule of the width of the anterior teeth and the anterior arch perimeter, when altered the convexity of the anterior arch, with the width of the maxillary anterior arch keeping constant, and to provide a reliable basis for later digitized and personalized aesthetic analysis of front teeth.@*METHODS@#In the study, 61 front teeth complete and well-arranged models had been selected from the working models after the prostheses in Department of Prosthodontics, Peking University School and Hospital of Stomatology, including 22 male models and 39 female models. A photograph was taken from the occlusal surface of each model using the fixed magnification with a single lens reflex camera. The width of anterior teeth, the width of anterior arch and the convexity of anterior arch had been measured using the Photoshop software. The ratio of the width of the anterior teeth to the width of the anterior arch was calculated. Keeping the width of anterior arch unchanged, the layer free transformation function used to add or decrease the curvature of the anterior arch from 1-5 mm, each circumference of the anterior arch was measured. According to the proportion of their anterior teeth in the anterior arch perimeter, the width of each anterior teeth crown under different convexities of anterior arch was calculated. SPSS 23.0 was used to analyze the ratio of the width anterior teeth to the anterior arch perimeter and correlation between the convexity of the anterior arch and the width of the anterior teeth.@*RESULTS@#The percentages of the median length of the anterior arch in the central incisor, lateral incisor and canine were 36.2%±1.3%, 30.2%±1.5%, and 33.6%±1.4%, respectively. The proportions were normal distributions and not related to the perimeter of the anterior arch. When the width of the anterior arch was constant, there was a positive correlation between the convexity of anterior arch in the range of 5 mm and the width of anterior teeth or the front arch circumference. With each increase or decrease of 1 mm of the convexity of anterior arch, the width of the middle incisor increased or decreased by about 0.18 mm, the half circumference of the anterior arch increased or decreased by about 0.50 mm.@*CONCLUSION@#The width of the anterior teeth in the middle-distal direction remained stable in the anterior arch circumference. Within a certain range, when the width of the maxillary anterior arch remains unchanged, the width of the anterior teeth and the perimeter of the anterior teeth are positively correlated to the convexity of the anterior arch.
Subject(s)
Female , Humans , Male , Cuspid , Dental Arch , Incisor , Maxilla , Odontometry , SoftwareABSTRACT
According to the width and height of the maxillary alveolar ridge, the maxillary edentulous jaws can be divided into three categories by using modified lip-tooth-ridge (MLTR) classification. Class Ⅰ is characterized by sufficient bone available for implants in the vertical and horizontal aspects and is suitable for fixed implant-supported prostheses. Class Ⅱ is characterized by sufficient bone amount available for implants in a horizontal aspect but insufficient for lip support and is suitable for a fixed detachable implant-supported prosthesis. Class Ⅲ is characterized by inadequate amount of bone for implants (with vertical or horizontal components) and is suitable for the use of zygomatic implants or traditional complete denture. Patients belonging to Class Ⅰ can be further classified into two sub-categories according to the height of the alveolar ridge. The first subclass is characterized by minimal bone deficiency and is suitable for a conventional implant-supported "crown and bridge" prosthesis. The second subclass is characterized by a larger vertical deficiency than that of the first subclass and is suitable for implant-supported hybrid prosthesis. The MLTR classification system can help the dentist to determine whether the patient is suitable for implanting dentures and whether fixed denture or removable denture is appropriate for the patient, select indications, reduce complications, and achieve long-term results.
ABSTRACT
OBJECTIVE@#To evaluate the deviation of digital implant surgical guides during fabrication process in the Organical Dental Implant (ODI) system.@*METHODS@#This study included two parts. The first part was the in vitro study. A resin block with a diagnostic template was used for the planning. After cone beam computed tomography (CBCT) scanning, a surgical guide with eight implants was virtually designed using the ODI system. The guide was milled by a 5-axial numerical controlled milling machine, and an optical scanning was taken to digitalize the guide to a standard tessellation language (STL) form. The STL data were then imported into an ODI software and registered with the original design. The deviation of the sleeves between the design and the STL was measured in the ODI software and set as the golden standard. Then the ODI examination table was used to measure the deviation of the guide during fabrication. Examiners A and B measured 10 times separately. The reliability and the validity of the examination table was calculated. The second part was the in vivo study: The deviation during fabrication of 12 guides designed and fabricated by the ODI system were measured using the examination table.@*RESULTS@#The standard deviation of the deviation measured using the examination table by examiners A and B were all below 0.40 mm (for the shell reference points) and 0.71 degree (for the angles). No significant difference was found between the two examiners for any implant sites. The result of the examination table was larger than that of the software for the shell reference point (t-test, P<0.05), but no significant difference was found for the angle deviation (t-test, P>0.05). The 45 implants positions in the 12 guides for the in vivo study were examined using the examination table. The deviations at the shell reference points were (1.06±0.29) mm (0.42-1.75 mm), and at the implant tip were (1.12±0.48) mm (0.41-2.44 mm). The angle deviations were (1.42±0.70) degree (0.29-2.96 degree).@*CONCLUSION@#Deviation is unavoidable during the fabrication process of the guides. The examination table of the ODI system is a reliable and valid tool to measure the deviation during fabrication of the ODI guides. More studies should be designed to research the relationship between the fabrication deviation and the implant insertion deviation.
Subject(s)
Computer-Aided Design , Cone-Beam Computed Tomography , Dental Implantation, Endosseous , Dental Implants , Imaging, Three-Dimensional , Reproducibility of Results , Surgery, Computer-AssistedABSTRACT
<p><b>OBJECTIVE</b>To investigate clinical feasibility and technical features of immediate loading with linear occlusion on 2-implant-supported overdenture and to evaluate short-term effect of the treatment</p><p><b>METHODS</b>Six edentulous patients with severe residual ridge resorption were enrolled. Two interforaminal implants were inserted for each patient and then immediate impressions were taken. Implant-supported bar-retained overdentures were restored for the patients within 24 hours. Clinical and radiographic examinations were conducted post-operative 1 week and 1, 3, 6, and 12 months. Thereafter at every 6 months the stability of implants, tissue situations around implants, radiographs and satisfaction level of patients were examined for each patient.</p><p><b>RESULTS</b>Six cases and 12 implants were followed from 9 to 30 months. No implant was loosened or dropped. Sulculus bleeding index was 0-1 and probing depth of sulcus was less than 2 mm. The gingival tissues around the implants were healthy. Radiographic examination showed that bone resorption was less than 1 mm in the first year. The alveolar bone around the implants hasn't show obvious resorption stable height. Patients were satisfied with the implants.</p><p><b>CONCLUSIONS</b>The results of this study indicate that immediate loading using linear occlusion on implant-supported bar-retained overdenture is predictable in some cases and can achieve satisfaction in the short-term service. Further study is needed to assess the long-term results.</p>